Hydraulic Semi Automatic Circular Saw Pipe Cutting Machine

• Vertical sideway saw feeding is stable, assuring long cutter operating life.
• The machine has the characteristics of simple operation, low noise, no pollution, and good sawing quality.
• Saw chips are treated together, allowing for easy and simple machine maintenance.
• Strongly constructed this unit features low vibration and long operating life.
• The saw can be adjusted back and forth for accurate cutting position, ensuring extended saw blade operating life and fast cutting.
• Auto lubrication system.

Application

It is ideal for cutting all kinds of thick-walled, stainless, carbon, and steel pipes.

Details

Features

Clamp cutting

Automatic clamping and cutting, free adjustment of knife speed

High-power motor

Durable, powerful and efficient

Integral protective cover

Aluminum chips are collected centrally
Reduce flying aluminum chips
Improve manufacturing operation safety

Foot switch

Safe, time-saving and labor-saving

work process

1. Refueling: Open the oil filter cover, add No. 46 hydraulic oil, the amount of oil should exceed two-thirds of the oil level, and it is best to fill it up completely if possible.
2. Power on: three live wires, note that there is no ground wire.
3. Add water to cutting fluid: the ratio is 1:50 until it is full.
4. Install the saw blade: first remove the pressure cover counterclockwise, install the saw blade, and pay attention to the teeth facing up. After installation, lock it with the cover, tighten it clockwise, and install the saw blade cover.
5. Start the machine: Turn on the machine switch, the start light comes on, click the start light, and start the machine. Check whether the oil pump is absorbing oil. If not, arbitrarily switch two live wires. Adjust the feed speed to 2.5. After getting familiar with the machine, you can adjust it yourself later.